Installing first KMS Server
Below are the steps I used to install the KMS server. We determined that due to the number of client activations, and the capacity of our infrastructure we had no problems installing this server on our secondary domain controller. From here on we will call it DC1.
- On the Domain Controller we run CMD with elevation
- Type slmgr /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx where the last section is the Key from your volume licensing website.
- Open “Windows Firewall with Advanced Security” via Start menu -> Administrative Tools.
- Under Inbound Rules scroll down to “Key Management Service (TCP-In)”, right click and select enable.
- Reboot the machine – note you can restart the Software Licensing service but I preferred to reboot it (seeing as the server was not in use for anything else)
To disable the requirement for strong password for users via Windows PowerShell, would you please take the following steps:
Step 1. Install the Office 365 cmdlets.
Step 2. Connect Windows PowerShell to Microsoft Online Service.
Step 3. Start Microsoft Online Services Module for Windows PowerShell as an administrator and connect to Microsoft Online Service with a global administrator account by running the following command:
Version 9.0 of the Cisco ASA software has now been released. Here are some of the major features in the new release.
Filter ICMP by ICMP code
Clustering of multiple ASAs
OSPFv3 and EIGRP support
IPv6 support on outside interface for VPNs
NAT for IPv6 and NAT64
Unified ACLs for v4 and v6
Clientless SSL VPN – Support for new browsers and HTML5
Site to Site VPN in multiple context mode
Dynamic routing in multiple context mode
Mixed firewall support in multiple context mode
So Today I decided to upgrade my ASA5505 to Version 9.0(1). Below are the steps to upgrade your ASA More »
As a CCNA / CCNP candidate you are expected to understand how to set and interpret the OSPF cost function on your Cisco devices
During your career as a Cisco network engineer you will have to deal with setting and manipulating the OSPF costs on an interface.
OSPF uses a metric called “Cost” to calculate the metric of path. The cost is a cumulative value which is an incremental metric.
The cost is as a default based on the bandwidth of the interface. The Higher the interface bandwidth the lower the cost that is associated to that interface, to see the cost that is assigned to any given interface which is participating in OSPF issue the following command:
Router# show ip ospf interface
The output of this command will show the current cost given to this interface. The costs of the interface is calculated by taking the bandwidth of the interface and dividing this number by a value known as the “auto-cost reference-bandwidth”. This auto-cost reference-bandwidth is an integer used to calculate a standard metric across OSPF and is set to 100,000,000. The cost is calculated as follows:
100,000,000/BW More »
SSH access on Cisco ASA
Firewall(config)# enable passwordpassword
Firewall(config)# username test password test123
Firewall(config)# aaa authentication ssh console LOCAL (LOCAL in all caps for LOCAL db)
Firewall(config)# ssh A.B.C.D 255.255.255.0 inside
Firewall(config)# ssh version 2